CPX Series Low Profile Compression Load Cell

CPX Series Low Profile Compression Load Cell View larger

£ 144.00 VAT excl.
£ 172.80 VAT incl.

CPX Series Low Profile Compression Load Cell
New
  • CAPACITIES FROM 250 TO 10000 kg
  • CE-M C3 APPROVED, from 2500 to 10000 kg
  • LOW PROFILE
  • GREAT RESISTANCE TO LATERAL FORCES
  • STAINLESS STEEL CONSTRUCTION
  • IP68 PROTECTION

Product Options
Capacity

The maximum capacity

A Stainless Steel compression load cell suitable for weighing tanks or hoppers along with the KCPN Mounting Kit.  Can also be used for force measurement.

TECHNICAL FEATURES

  • Minimum load cell verification interval: Vmin = EMax / 10000
  • Full Scale Output: 2mV/V +/- 0,5%
  • Non-Repeatability: 0,01% F.S.
  • Temperature effect on zero: 0,02% / 10°C
  • Temperature effect on full scale output: 0,02% / 10°C
  • Compensated Temperature Range: -10°C/+50°C
  • Operating Temperature Range: -20°C/+60°C
  • Creep error after 30 minutes: 0,02% F.S.
  • Recommended excitation voltage: 10 Vdc
  • Maximum tolerated excitation voltage: 15 Vdc
  • Input Resistance: 750 ± 10 Ohm
  • Output Resistance: 700 ± 5 Ohm
  • Zero Balance: +/-1% F.S.
  • Insulation Resistance: >5000 MOhm
  • Safe Overload: 120% F.S.
  • 4-wire shielded cable, 5 mm diameter:
    • - 5 m long for CPX 250...5000 versions;
    • - 10 m long for CPX 7500...100000 versions.

Example shown with KCPN mounting kit

Example of CPX Compression Load Cell used with the KCPN mounting kit

Capacity 250, 500, 1000, 2500, 5000, 7500, 10000, 12500, 15000, 30000, 50000, 100000 Kgs
IP Rating IP68
Related Products
Please wait...